Since the copy function with remote control, no replicator, without open the case, without learning to code with the host. Duikao with the original remote control can be used directly after. Two remote control can be combined into a remote control used in conjunction with the vast majority of the market can be copied wireless remote control (remote control home security, car alarm remote control, motorcycle alarms, remote control, electric vehicle anti-theft remote control, rolling gates remote control, garage door remote control, electric door remote control, etc.). Chip models can be copied: PT2260, PT2262, PT2240, RF527, VD5326, VD6026, EV1527, SMC926. 1520
Firing frequency 310.315.330.350.390.418.430.433. 8 frequency can be selected. Instructions: The picture is grainy on the remote control codes (brand new three generations of the learning remote control codes are similar so I just made a style instructions)
1. Khao remote control, two hand thumb while holding down the "arrows" and "arrow down", about 5 seconds, fast direct bright light. Respond, the carnivals direct light, the hand can let go, (then press any key does not light), that cleared.
2, copy the address of the remote control codes of other
The first wife and learning remote control remote control as close as possible, while holding down the button need to copy and the learning of a remote control button about 3 seconds, the red LED light will be directly connected. This shows that the key address code has been learning success! The other 3 on the remote control buttons also operate the same way, we can even address the two different remote control codes (the same frequency) into a self-study to learn the remote control. Learning remote control learning Note: Distance learning as much as possible away from the closer, has been learning remote control can be longer, you can learn a few more to ensure success in learning
3, the recovery operation after misuse:
If you normally use careless accidents have been properly cleared for use the address of the remote control code, you can press the remote control can be marked with the arrow keys on and squares about 3 seconds, LED will direct light, indicating that was accidentally removed The address code has been successfully restored.
Note:
1), the use of remote control of our own copy to copy, be sure to take the remote control from the copy to clear the existing code.
Here is a test from the remote copy existing code has not been successfully cleared the way:
The end of the Qing code when you move, you can press a key to any replicator, if not immediately at this time flashing LED, 2S flashes until then had been flash! ! That means the original data replicator code has been completely removed;
If the LED is flashing rapidly immediately, it means that the original data replicator code still exists. (Repeat steps 1 to be clean code operation, until the successful completion of the Qing code!)
2), can only be copied from the copy fixed code remote control, you can not copy the rolling code, (for example, the chip is HCS301)
|
|
User
login
